An electrostatic sorting system is a device that uses the differences in charging properties of materials in a high-voltage electric field to separate and purify different substances.
QFJD-1000 PP/PE Intelligent Sorting System
Power: 122 kW
Capacity: 1–1.5 t/h
Output Categories: 2
Sorting Target: Household Chemical Plastics
QFJD-2000 Intelligent Plastic Sorting System
Used for sorting plastics from WEEE (Waste Electrical and Electronic Equipment). The recovered mixed WEEE is shredded, water-washed, and dried to obtain plastics with a particle size of approximately 16 mm, which are then conveyed into this sorting system. Through one or multiple sorting processes by material type, different plastics can be separated. After sorting, the plastic purity can reach over 98%, the silicone rubber content in the plastic is below 2%, and the capacity is 1.5–2 t/h.
Power: 58.58 kW
Capacity: 1.5–2 t/h
Plastic purity after sorting: ≥98
Silicone rubber content: ≤2%
QFJD-4000 Intelligent Plastic Sorting System
Mixed waste plastics are shredded to approximately 16 mm, water-washed, and dried before entering the intelligent sorting system. Through one or multiple sorting processes, different plastics can be separated by material type.
Power: 324 kW
Capacity: 2.5–3.5 t/h
Plastic purity after sorting: ≥98
Silicone rubber content:≤2％
