The quality of the hydraulic oil used in the paper baler machine directly determines whether the oil cylinder can play a great role, and also directly affects the failure rate and service life of the oil cylinder. In order to ensure the effective production of the baler, No. 46 anti-wear hydraulic oil is required. The direct influence factors of the production efficiency of the waste paper baler are: the model and specifications of the baler, the output of different models is different, and the different specifications directly determine the production efficiency of the baler. The production efficiency of the conventional waste paper baler is higher than that of the baler with an outlet.
Paper Baler Machine
Waste paper baling machine is packed by tensioning, heat capacity, tape cutting and gluing. Regardless of the size of the package, the carton waste paper packing machine can pack without adjusting the machine. The waste paper baler is a mechanical structure, and some parts are imported cotton baler parts. The back cutting edge is stable and reliable, easy to adjust, and the waste paper baler is reasonably priced. When the ultrasonic generator is running, the ultrasonic energy is converted by the ultrasonic wave. Flash point of automatic shearing machine:
1. The cutting machine is complete, beautiful, smooth and smooth, and the edges are not scattered, and the cutting effect is good;
2.Shearing machine adopts PLC console, automatic feeding, computer counting, high precision, fast speed, fast adjustment, simple adjustment, fast, high efficiency, can cut multiple times at once
3, mostly used for gift belts, nylon belts. In the field of shearing machine production, such as shearing belts, such as scissors, inclined blades, dovetails, etc .; This product is widely used in packaging, metal processing, sheet cutting and other industries. The new fully automatic shearing machine (ultrasonic cutting machine) is a combination of ultrasonic welding technology and traditional shearing machine. Its good shearing effect is favored by friends around the world.
There are different reasons why air enters the waste paper baler system. During use and maintenance, please note the following:
1. An exhaust valve must be installed on the top of the waste paper baler to exhaust air from the cylinder and the system. The change in oil temperature and load adjusted by the straw baler is greater than the throttle valve, and a flow control valve is used. The parallel hydraulic cylinder synchronization circuit has a simple structure and low cost, and is widely used.
2. Try to prevent any pressure in the waste paper packer system from falling below atmospheric pressure. At the same time, a particularly good sealing device is used. Replace the fault in time. Tighten the fittings and the surface of each fitting, and clean the suction pipe promptly. Pack the oil filter at the tank inlet.
3. Always check the liquid level of the waste paper baler. The height of the waste paper baler should be maintained on the mimeograph scale. On low surfaces, the suction nozzle and the same pipe opening should also be below the liquid level. Delimited by partitions.