The basic methods of garbage destruction and harmless treatment:
Garbage sorting machine manufacturer shares that the economy of any country, which
is closely related to the source of raw materials. At present, the world's
demand for natural resources has reached a stage where it is on a par with the
mineral reserves that are the basis of modern industry. In other words, the
treasure that nature has created over hundreds of millions of years of
geological time will be consumed in a few decades and converted into three
wastes and waste heat, as the law of conservation of matter states. Most of the
wastes return to nature, polluting the environment and destroying the ecological
balance of the earth. Mankind is facing such a paradoxical phenomenon, on the
one hand, the danger of depletion of limited natural resources, on the other
hand, the destruction of ecological balance caused by the continuous
accumulation of production and domestic wastes, which threatens the foundation
of human existence.
Grbage sorting system manufacturer shares that in solving the problem of waste, it is necessary to firmly establish a
concept, namely cannot eliminate waste, and can only be "cut" where, or spread
to the environment, expectations of nature to break it down into different
components, eventually to accommodate to the cycle of itself, but a lot of waste
from the structure is the stranger with natural circulation, the regeneration
process of nature, unable to cope with the continuous agglomeration and changed
on the material waste.

Municipal Solid Waste Recycling Rystem
After sorting, weeding or crushing, most of the wastes in construction waste
can be reused as renewable resources, such as scrap steel bar, scrap iron wire,
scrap wire and various scrap steel accessories. Waste bamboo wood can be used to
make artificial wood; Bricks, stones, concrete and other waste after being
broken. Therefore, municipal waste sorting system must be insisted on in the
treatment of construction waste.
To minimize the conversion of natural resources to waste and reduce the risk
of polluting nature. Waste should be used to the maximum extent possible on the
site where it is intended to be destroyed, returned to the production process,
or put into the biological regeneration process, but in a form that reengages it
in the material cycle of nature.