Waste paper baler is packaging machinery used to compress waste paper items. Used by various waste paper factories, old waste recycling companies, and other units and enterprises to compress a variety of recyclable fluffy waste products such as domestic waste, industrial waste, plastic, film, pasture, straw, cotton, iron filings, aluminum filings, and scrap Bale.
The baler can double the volume of waste products and increase the density of objects to make them easy to transport and store. It is one of the important equipment in the recycling of waste products.
Waste paper balers are mainly divided into two common models, vertical and horizontal. This article briefly summarizes the operation methods of the vertical baler for reference by industry personnel.
Vertical waste paper baler is a mechatronic product, mainly composed of mechanical systems, control systems, monitoring systems, and power systems. The specific organization structure can refer to the following figure.
Generally, the vertical waste paper baler is equipped with anti-rebound barbs, safety switches, and opening safety interlocking mechanisms to play a role of safety protection. However, there are many types of vertical baler brands circulating in the market, so I cannot describe them in detail here.
Different balers have different relevant parameters. The main difference lies in the motor power and the bale size.
The vertical waste paper baler has the characteristics of convenient operation and maintenance, safety and energy-saving, and low investment cost of equipment basic engineering.
In terms of installation, the vertical baler does not require foot screws during installation, just choose a flat ground to be stable.
In terms of power, some models support diesel engine power. When used in places without power, diesel engines can be used as power.
In terms of structure, the push cylinder and the push head of the vertical waste paper baler are connected by a spherical structure, which has good reliability and long service life of the oil seal. At the same time, there is a distributed shearing knife at the feeding port, which has high cutting efficiency.
—Safe operation of waste paper baler —
The waste paper packing process can be divided into four steps: adding materials, suppressing materials, binding materials, and turning out the materials. As a piece of professional equipment, we must pay attention to safe operation in operation to avoid damage to the equipment due to improper operation.
Place it flat when adding scrap
In the process of adding materials, it is necessary to pay attention to the input materials that must be placed in parallel and even, to prevent the machine from being easily damaged by tilting when the pressure plate is pressed down.
Pay attention to the load when suppressing materials
Generally, the running-in period of a new hydraulic baler is about 3 months. Do not overpressure during the running-in period, as overpressure will shorten the service life of the equipment.
In daily use, if the machine is pressed for a long time, the motor load will increase, the current will increase, the hydraulic oil will rise sharply, and the cylinder and tubing will increase in tension, which will also shorten the life of the machine.
The operator needs to stand in the correct position
When the vertical waste paper baler is started, the pressing plate compresses the material downward. The material will generate a great external thrust due to the compression. When the door lock is damaged, the door will receive a great internal thrust, which may automatically pop up and the door will pop up. The force will be great, if the operator is standing in front of the door, other injuries may occur.
Therefore, the operator must not stand in front of the door. The correct standing position should be holding the handle of the manual reversing valve with the right hand, and the body is at a 45-degree angle with the round column, so as to avoid hurting people when the front door and side door pop out.
Beware of the elasticity of the door when picking up
After the compression is completed, when the door is opened to pick up the goods, the door will automatically pop out due to the outward thrust of the compressed material. When it is ejected, the elastic force is large and the door will move forward for a certain distance, so people cannot stand in front of the door when opening the door. So as to avoid accidents.